Crowd & Pedestrian Barricades
Crowd control barriers manage pedestrian movement and keep people out of restricted areas, on construction sites and excavations as well as at concerts, races and large music festivals. The HERMEQ range covers fixed leg and loose leg steel barricades, HDPE plastic pedestrian barricades, expanding and folding safety barriers, and post and chain. Steel frames are galvanized or powder coated for repeated outdoor use, and plastic panels are molded without sharp edges for public areas. Walkthrough access gates add controlled entry and exit points to a steel line and connect to the barricades with the same built-in hooks and eyes.
Types of crowd control barriers
The range divides by job: interlocking steel and plastic panels build long perimeter runs, expanding and folding barriers close short spans at short notice, and post and chain marks out areas indoors.
Fixed leg steel crowd control barricades
Offset legs welded to the frame let these barricades stand on uneven ground with no loose parts, and each frame nests into the next for stacking, which makes fixed leg steel the standard choice for jobsite perimeters, event lines and logistics yards where barricades move often. The fixed leg steel crowd control barricades are the everyday galvanized frame for these runs. Where wind or passing equipment could shift a line, the heavy duty crowd control barricade has deeper legs for more ground contact. Where color matters, powder coated crowd control barricades are finished in RAL colors.
Loose leg steel barricades with reflective panels
Loose leg frames stand on detachable feet, so the panels stack flatter for storage and truck loads and the feet go on at the site. The loose leg pedestrian barricade with reflective panel carries a reflective plate at the center of the frame that picks up headlights and work lights. Choose it for lines that stay up after dark, for roadside and utility work, and where yard or truck space is short. Fixed leg frames remain the better choice where crews would prefer no separate feet to track, fit and replace.
Plastic pedestrian barricades
For events, sidewalks and public areas, the plastic crowd control barricades are a general-purpose HDPE panel with tool-free hook-and-eye joints and swivel feet that turn for stacking. The event crowd control barricade is the high-visibility orange version for festivals and busy pedestrian zones. On temporary roadwork, utility and pedestrian routes, the reflective plastic barricade comes with standard or anti-trip feet. Event organizers and contractors who want their name on the line choose the custom branded crowd barricades, which take a swappable nameplate.
Expanding and folding safety barriers
Expanding barriers fold to a compact pack and pull out across a doorway, aisle or spill, so they close a hazard zone in a facility or maintenance area at short notice. The expandable safety barrier is a light plastic unit that clips to the next one for a longer closure. It also comes as a yellow and black expandable barrier for transit, retail and industrial sites. For wider closures the wheeled, lockable aluminum concertina barrier extends up to 13.1 ft, and the full selection sits under expandable barriers.
Post and chain barriers
Post and chain marks a boundary that people can see and walk around, with red and white posts on bases and chain between them, for indoor areas and low-traffic outdoor spaces. The post and chain barrier suits warehouse walkways, factory floors, school events and zones that change often, since the chain extends easily across a larger area. It guides people and is not built to hold back a crowd, so entrances and event perimeters need steel or plastic panels.
Steel or plastic crowd control barricades
Most of the range is steel or HDPE plastic, and the right material depends on how long the line stays up, how often it moves and who handles it. Steel barricades have tubular frames with vertical infill bars, either galvanized against rust or powder coated over galvanizing for color, and they take repeated loading, stacking and relocation across long event and jobsite perimeters. Steel is the usual choice for perimeters where crowds press against the line and for fleets that move from job to job every week.
Plastic barricades are molded from virgin HDPE, which is lighter for one-person handling, resists cracking and fading, and has no screws, rivets or sharp edges to catch hands or clothing. The plastic crowd control barricade sits low enough to the ground that small children cannot slip underneath, which suits public areas, schools and sidewalks.
The one aluminum product in the range is the concertina barrier, a powder coated folding unit on wheels for concourse, facility and maintenance closures.
Pedestrian barricades for jobsites, events and facilities
Construction sites and excavations
On a jobsite the barricade line forms an exclusion zone around heavy equipment, open trenches and active work areas, and it keeps the public and other trades out of them. Ground on site is rarely level, so fixed leg steel frames or plastic barricades with joints that allow for uneven ground keep the run continuous. Temporary pedestrian walkways past the site are built from the same panels, which keeps one fleet working for both jobs.
Concerts, festivals, races and parades
Events use barricades for entry funnels, security checkpoints, queue lanes and the edges of marathon, race and parade routes. Layouts change between the build, the show and the breakdown, so panels that unhook, restack and relink quickly matter as much as the frame itself. Branded panels and printed covers put sponsor names and wayfinding on the line for the duration of the event.
Sidewalk, utility and roadside work
Work beside traffic needs a line that drivers and pedestrians see in poor light: high-visibility orange plastic, reflective panels on loose leg steel, and anti-trip feet where the barricades cross a walkway. Where traffic must be kept out of the work zone, use concrete barriers or water filled barriers and run the pedestrian line behind them.
Warehouses, schools, transit and facilities
Indoor sites need closures that store in a small space and go up in seconds, such as expanding barriers across a spill, an elevator repair or a closed aisle, and post and chain to mark walkways and work zones. Stations, transit hubs and healthcare buildings use the yellow and black expanding units around maintenance work, and the wheeled concertina closes wider concourse areas.
Color, wind and connections for outdoor barricade lines
With type and material settled, the rest of the choice depends on the site itself, from the people the line has to signal to, through its exposure to wind, to the points where people need to cross it.
Visibility, color and branding
Color on a barricade line makes it visible and tells people what it means. Powder coated steel comes in RAL colors, and plastic barricades can be color coded with feet in a different color, which lets one site mark separate zones, contractors or entry lanes. Plastic barricades can also carry embossed company identification or a branded nameplate.
Indoor or outdoor use and wind exposure
Indoor and light-duty outdoor work suits the plastic expanding barriers and post and chain, which are listed for that use, while exposed outdoor lines call for steel or plastic panels. Plastic barricades in exposed spots, or on layouts that stay up for weeks, take ballast blocks or hook-on weights, and retrofit braces add support for long-term deployment. The custom branded barricade listing gives its wind classes with ballast fitted, which is a planning reference for exposed sites. A cover or jacket turns an open frame into a solid face that catches the wind like a sign, so any line carrying covers needs ballast or bracing.
Connections along a barricade line
Steel barricades join end to end with hook-and-eye connectors, so a long run becomes one interlocked line. Plastic barricades link with tool-free hook-and-eye joints that allow for uneven ground. A walkthrough gate takes the place of one panel in a steel line, so mark where workers, deliveries and the public need to cross before ordering, and keep emergency routes free of fixed panels.
Crowd control barrier accessories
Gates and ballast change how a line works on site, while racks and carts decide how quickly a fleet moves between jobs.
Walkthrough access gates
The walkthrough barricade gate is a full-height panel with a spring-loaded, self-closing pedestrian gate and a slam plate that marks a controlled entry and exit point in a run. It hooks into both fixed leg and loose leg steel lines, so one gate design works across a mixed steel fleet.
Ballast blocks and barrier weights
Ballast holds lighter barricades in place in wind and on long-term layouts, and it replaces sandbags that split and wear out. The barricade ballast block is a red plastic-coated concrete block with a hand grip and angled sides that keep the trip risk low on a walkway. Dropblock barrier weights are plastic weights that hook onto crowd control and pedestrian barricades, fencing and signs.
Barricade covers and jackets
Barricade covers and jackets fit over steel crowd control barricades and carry full-color printing for logos, sponsors and safety messages. They are fire rated and reusable, in PVC mesh or breathable mesh, for parades, marathons, concerts and job sites with public foot traffic.
Storage racks and transport carts
A barricade storage rack holds up to 30 fixed leg, loose leg or plastic barricades, stacks on other racks in the yard and comes with or without forklift runners. The barricade cart carries up to 24 steel barricades on swivel casters for moves by hand across a venue or jobsite. To size the order, divide the fleet by the rack or cart capacity and round up.
Reflective strips
Reflective strips add low-light visibility to barricades and fencing that have no reflective panel of their own, for lines that stay up overnight or run beside traffic.
Popular Categories
Traffic Barricades
View Products >
Expandable Barriers
View Products >
Water Filled Traffic Barriers
View Products >
Frequently Asked Questions
Yes. Crowd control barriers, crowd control barricades, crowd barricades and pedestrian barricades are names for the same family of freestanding panels that link into a line to guide or hold back people. The name used tends to follow the setting, with crowd control more common at events and pedestrian barricades more common on jobsites and public works.
No. Pedestrian barricades separate people from a hazard and are not designed to stop or contain a vehicle. To keep traffic out of a work zone or protect a crowd from vehicles, use concrete barriers or water filled barriers, with the pedestrian barricades on the walkway side.
Type 3 barricades are road-closure barricades with three horizontal reflective rails on a frame, used to close a road or lane to traffic. They are traffic control equipment, and HERMEQ lists them with its traffic barricades in the Barricades section.
For most of the range, yes. Plastic barricades, expanding barriers and post and chain are made for setup by one person. Steel barricades are heavier, but they nest when stacked, and a barricade cart on swivel casters lets one person move a full stack across a site.
Divide the length of the run by the length of one panel and round up, counting each walkthrough gate as one panel position. Panel lengths differ between steel and plastic barricades, so take the figure from the product page you are ordering from. For a closed perimeter, measure every side separately and add spare panels for layout changes on the day.